Motorola is all set to launch new Moto smartphones, Moto G7 along with Moto G7 and Moto G7 Plus pretty soon. Now, the smartphone’s CAD-based renders have been leaked online revealing key design language.
The renders were leaked OnLeaks in collaboration with Mysmartprice and it reveals the smartphone from all angles. To start with, the front panel comes loaded with a waterdrop notch and noticeable chin at the base. The earpiece is now situated above the notch. The back panel comes loaded with dual-camera setup and there is a camera hump, which is similarly found in Moto G6 series and Moto X4. The panel could feature a 3D curved glass, similar to what we have seen in Moto X4.
The right house comes loaded with volume rockers and power on/off button. The left comes loaded with SIM slot. The base of the device sports USB Type-C port, which is flanked between a speaker grille and a 3.5mm audio jack. The Moto G7 will measure 157 x 75.3 x 8mm.
Previously, Moto G7’s key specifications have been leaked online. The leaked revealed that the smartphone will feature a 6.4-inch Full HD+ display with a screen resolution of 2340 x 1080 pixels. The phone will be powered by Qualcomm Snapdragon 636 Chipset with Adreno 509 GPU.
The phone is backed by a 4GB of RAM and 64GB of internal storage, with an option to expand the storage up to 256GB via microSD card slot. The phone is backed by a dual-camera setup with a combination of 16-megapixel primary lens and a 5-megapixel secondary shooter. For the front, there is a 12-megapixel shooter for selfies and video calling. The phone is backed by a 3,500mAh battery and runs on Android 9.0 Pie.